利用GLAS激光测高数据评估DSM产品质量及精度优化   总被引：2，自引：0，他引：2  

胡柳茹  唐新明  李国元  付冬暇  窦显辉  赵世湖 《测绘通报》2019,(11):39-43

提出了一种利用卫星激光测高数据直接优化提升数字表面模型（DSM）产品精度的方法。选取境外中亚地区的资源三号DSM开展试验，通过采用多准则约束方法提取激光高程控制点，分别利用偏度、中值、线性、二次多项式等进行DSM误差修正，发现4种模型均能有效消除DSM系统误差，其中基于二次多项式的方法更适用于平地和丘陵地貌，线性模型更适用于高山地貌。试验验证了采用卫星激光测高数据优化境外DSM技术流程的可行性，最终可提高DSM的绝对高程精度。  相似文献   

山东南部近海秋季长蛇鲻相对资源量的分布及其影响因素     

刘逸文  张崇良  昝肖肖  孙铭  徐宾铎  薛莹  任一平 《中国海洋大学学报(自然科学版)》2020,50(4):45-53

为探究长蛇鲻(Saurida elongate)的生态习性和分布规律,并为长蛇鲻资源的合理利用与养护提供科学依据,本文根据2016年秋季在山东南部近海进行的渔业资源与环境调查数据,分析了该海域长蛇鲻的分布特征,研究长蛇鲻成体、幼体的分布差异,并利用广义可加模型(GAM)研究其分布与生物因子和环境因子的关系。结果表明,长蛇鲻成体与幼体的分布存在差异,成体分布范围广,幼体主要分布在30 m等深线及以浅水域。GAM模型的结果表明,饵料生物、底层水温、水深和底层盐度是影响长蛇鲻相对资源量分布的主要因子。成体、幼体的分布与影响因子的关系差异极显著(P<0.01)。长蛇鲻成体的相对资源量随饵料生物和底层水温的增加表现为先上升后下降的趋势,而幼体呈现一致上升趋势;成体和幼体的相对资源量随水深增加均呈下降趋势;幼体相对资源量随底层盐度增加有明显上升趋势,而盐度对成体的影响不显著。本研究认为山东南部近海是长蛇鲻的重要栖息地,水温和盐度是成体和幼体分布差异的可能原因。  相似文献   

海表面温度时空变异特征及对验证误差影响     

蒋锦刚  徐曜  聂晨晖  潘骁骏  周斌 《遥感学报》2019,23(2):336-348

海洋要素的变化存在明显的区域性和季节性的变化特性,本文选择海洋要素中最为突出的海表面温度(SST)要素作为主要分析参数,设计时空变异参数的计算指标,分析时空变异对验证误差影响的关系,通过研究及试验的数据精度验证,证明了时空变异是造成误差的直接原因之一。强烈的时空属性变异,在验证过程中会引入很大的验证误差,处于不同变异等级区划的数据,其验证结果相对误差可达13.08%,变异越剧烈的区域,精度验证效果越差,验证误差就越大,这些误差并非完全是遥感产品的误差,验证结果不具有代表性,不能真实的反映遥感产品的误差特征。对于SST等海洋遥感产品验证时,需要考虑时空变异对验证误差的影响和贡献,合理选择验证试验区域、代表性的评价数据集和科学的评价方法。  相似文献   

Inference and uncertainty of snow depth spatial distribution at the kilometre scale in the Colorado Rocky Mountains: the effects of sample size,random sampling,predictor quality,and validation procedures          下载免费PDF全文

J. L. McCreight  A. G. Slater  H. P. Marshall  B. Rajagopalan 《水文研究》2014,28(3):933-957

Historically, observing snow depth over large areas has been difficult. When snow depth observations are sparse, regression models can be used to infer the snow depth over a given area. Data sparsity has also left many important questions about such inference unexamined. Improved inference, or estimation, of snow depth and its spatial distribution from a given set of observations can benefit a wide range of applications from water resource management, to ecological studies, to validation of satellite estimates of snow pack. The development of Light Detection and Ranging (LiDAR) technology has provided non‐sparse snow depth measurements, which we use in this study, to address fundamental questions about snow depth inference using both sparse and non‐sparse observations. For example, when are more data needed and when are data redundant? Results apply to both traditional and manual snow depth measurements and to LiDAR observations. Through sampling experiments on high‐resolution LiDAR snow depth observations at six separate 1.17‐km² sites in the Colorado Rocky Mountains, we provide novel perspectives on a variety of issues affecting the regression estimation of snow depth from sparse observations. We measure the effects of observation count, random selection of observations, quality of predictor variables, and cross‐validation procedures using three skill metrics: percent error in total snow volume, root mean squared error (RMSE), and R². Extremes of predictor quality are used to understand the range of its effect; how do predictors downloaded from internet perform against more accurate predictors measured by LiDAR? Whereas cross validation remains the only option for validating inference from sparse observations, in our experiments, the full set of LiDAR‐measured snow depths can be considered the ‘true’ spatial distribution and used to understand cross‐validation bias at the spatial scale of inference. We model at the 30‐m resolution of readily available predictors, which is a popular spatial resolution in the literature. Three regression models are also compared, and we briefly examine how sampling design affects model skill. Results quantify the primary dependence of each skill metric on observation count that ranges over three orders of magnitude, doubling at each step from 25 up to 3200. Whereas uncertainty (resulting from random selection of observations) in percent error of true total snow volume is typically well constrained by 100–200 observations, there is considerable uncertainty in the inferred spatial distribution (R²) even at medium observation counts (200–800). We show that percent error in total snow volume is not sensitive to predictor quality, although RMSE and R² (measures of spatial distribution) often depend critically on it. Inaccuracies of downloaded predictors (most often the vegetation predictors) can easily require a quadrupling of observation count to match RMSE and R² scores obtained by LiDAR‐measured predictors. Under cross validation, the RMSE and R² skill measures are consistently biased towards poorer results than their true validations. This is primarily a result of greater variance at the spatial scales of point observations used for cross validation than at the 30‐m resolution of the model. The magnitude of this bias depends on individual site characteristics, observation count (for our experimental design), and sampling design. Sampling designs that maximize independent information maximize cross‐validation bias but also maximize true R². The bagging tree model is found to generally outperform the other regression models in the study on several criteria. Finally, we discuss and recommend use of LiDAR in conjunction with regression modelling to advance understanding of snow depth spatial distribution at spatial scales of thousands of square kilometres. Copyright © 2012 John Wiley & Sons, Ltd.  相似文献   

Three‐dimensional shakedown solutions for anisotropic cohesive‐frictional materials under moving surface loads     

Juan Wang  Hai‐Sui Yu 《国际地质力学数值与分析法杂志》2014,38(4):331-348

Previous work on three‐dimensional shakedown analysis of cohesive‐frictional materials under moving surface loads has been entirely for isotropic materials. As a result, the effects of anisotropy, both elastic and plastic, of soil and pavement materials are ignored. This paper will, for the first time, develop three‐dimensional shakedown solutions to allow for the variation of elastic and plastic material properties with direction. Melan's lower‐bound shakedown theorem is used to derive shakedown solutions. In particular, a generalised, anisotropic Mohr–Coulomb yield criterion and cross‐anisotropic elastic stress fields are utilised to develop anisotropic shakedown solutions. It is found that shakedown solutions for anisotropic materials are dominated by Young's modulus ratio for the cases of subsurface failure and by shear modulus ratio for the cases of surface failure. Plastic anisotropy is mainly controlled by material cohesion ratio, the rise of which increases the shakedown limit until a maximum value is reached. The anisotropic shakedown limit varies with frictional coefficient, and the peak value may not occur for the case of normal loading only. Copyright © 2013 John Wiley & Sons, Ltd.  相似文献   

Two-stage permutation tests for determining homogeneity within a spatial cluster     

Qiliang Liu  Wenkai Liu  Min Deng  Yaolin Liu 《International journal of geographical information science》2019,33(9):1718-1738

The discovery of spatial clusters formed by proximal spatial units with similar non-spatial attribute values plays an important role in spatial data analysis. Although several spatial contiguity-constrained clustering methods are currently available, almost all of them discover clusters in a geographical dataset, even though the dataset has no natural clustering structure. Statistically evaluating the significance of the degree of homogeneity within a single spatial cluster is difficult. To overcome this limitation, this study develops a permutation test approach Specifically, the homogeneity of a spatial cluster is measured based on the local variance and cluster member permutation, and two-stage permutation tests are developed to determine the significance of the degree of homogeneity within each spatial cluster. The proposed permutation tests can be integrated into the existing spatial clustering algorithms to detect homogeneous spatial clusters. The proposed tests are compared with four existing tests (i.e., Park’s test, the contiguity-constrained nonparametric analysis of variance (COCOPAN) method, spatial scan statistic, and q-statistic) using two simulated and two meteorological datasets. The comparison shows that the proposed two-stage permutation tests are more effective to identify homogeneous spatial clusters and to determine homogeneous clustering structures in practical applications.  相似文献   

Global Statistical Assessment and Cross-Calibration with Jason-2 for Reprocessed HY-2 A Altimeter Data     

Maofei Jiang  Ke Xu  Yalong Liu 《Marine Geodesy》2018,41(3):289-312

HY-2 A (Haiyang-2 A) satellite was launched on August 16, 2011 and radar altimeter is one of its main payloads. We reprocessed two years of HY-2 A altimeter sensor geophysical dataset records (SGDR) data. This paper presents the main results in terms of reprocessed HY-2 A altimeter data quality: verification of data availability and validity, monitoring several relevant altimeter parameters, and assessment of the HY-2 A altimeter system performances. A cross-calibration analysis of reprocessed HY-2 A altimeter data with Jason-2 was conducted. The reprocessed HY-2 A altimeter data show good quality and have a low level of noise with respect to Jason-2. The same geophysical correction methods were used to calculate the sea surface height (SSH) for the two missions. The mean standard deviations of the crossover differences for HY-2 A and Jason-2 are 5.24 cm and 5.34 cm, respectively. The mean standard deviation of the crossover differences between HY-2 A and Jason-2 is 5.37 cm. These show that HY-2 A can provide SSH measurements at almost the same level of accuracy as Jason-2. The relative SSH bias between HY-2 A and Jason-2 due to the Ultra Stable Oscillator (USO) drift is obviously observed, and it can affect the calculation of mean sea level and should be further studied and corrected.  相似文献   

A New Retracking Technique for Brown Peaky Altimetric Waveforms     

Fukai Peng 《Marine Geodesy》2018,41(2):99-125

A new Brown-Peaky (BP) retracker has been developed for peaky waveforms that usually appear within ～10 km to the coastline. The main feature of the BP is that it fits peaky waveforms using the Brown model without introducing a peak function. The retracking strategy first detects the peak location and width of a waveform using an adaptive peak detection method, and then estimates retracking parameters using a weighted least squares (WLS) estimator. The WLS assigns a downsized weight to corrupted waveform gates, but an equal weight to other normal waveform gates. The BP retracker has been applied to 4-year Jason-1 waveform (2002–2006) in two Australian coastal zones. The results retracked by BP, MLE4 and ALES retrackers have been validated against tide-gauge observations located at Burnie, Lorne and Broome. The comparison results show that three retrackers have similar performance over open oceans with the correlation coefficient (～0.7) and RMSE (～13 cm) between altimetric and tide-gauge sea levels for distance >7 km offshore. The main improvement of BP retracker occurs for distance ≤7 km to the coastline, where validation results indicate that data retracked by BP are more accurate (15–21 cm) than those by ALES (16–24 cm) and MLE4 (19–37 cm).  相似文献   

SMAP卫星海表盐度产品的检验与校正     

秦思思  王辉  朱江  万莉颖  张宇  王昊运 《海洋学报(英文版)》2020,39(3):148-158

In this study, sea surface salinity(SSS) Level 3(L3) daily product derived from soil moisture active passive(SMAP)during the year 2016, was validated and compared with SSS daily products derived from soil Moisture and ocean salinity(SMOS) and in-situ measurements. Generally, the root mean square error(RMSE) of the daily SSS products is larger along the coastal areas and at high latitudes and is smaller in the tropical regions and open oceans. Comparisons between the two types of daily satellite SSS product revealed that the RMSE was higher in the daily SMOS product than in the SMAP, whereas the bias of the daily SMOS was observed to be less than that of the SMAP when compared with Argo floats data. In addition, the latitude-dependent bias and RMSE of the SMAP SSS were found to be primarily influenced by the precipitation and the sea surface temperature(SST). Then, a regression analysis method which has adopted the precipitation and SST data was used to correct the larger bias of the daily SMAP product. It was confirmed that the corrected daily SMAP product could be used for assimilation in high-resolution forecast models, due to the fact that it was demonstrated to be unbiased and much closer to the in-situ measurements than the original uncorrected SMAP product.  相似文献   

WOFOST模型对河南省冬小麦模拟的适用性分析          下载免费PDF全文

张弘  刘伟昌  李树岩 《气象与环境科学》2019,42(1):34-40

为进一步研究WOFOST模型在河南省冬麦区的适用性,以河南省30个农业气象观测站1991—2014年冬小麦观测资料、历史气象资料和土壤资料为依据,对WOFOST模型进行逐站调参和验证,分别建立了30个站的冬小麦模型参数。其中1991—2010年为模型调参年份,2011—2014年为模型验证年份。各站开花期和成熟期调参模拟的归一化均方根误差NRMSE分别小于5%和3%,验证误差分别为3.7%和2.9%。除潢川和固始外,模型对其余各站产量模拟的归一化均方根误差NRMSE全省各站均小于20.0%,验证误差全省平均为15.2%,大部分站点观测值和模拟值相关系数r通过了显著检验。利用调参后的模型模拟2011—2014年冬小麦生长动态变化可知,模拟地上部总干物重与实测单株干物重、模拟LAI与单株叶面积有较一致的变化趋势,拟合度较高。因此,WOFOST模型对河南省冬小麦主要发育阶段、产量及干物质积累模拟能力较强,具有良好的应用前景。  相似文献